Skip to content
Basement egress window with a window well installed — Egress Windows in Meridian, Ada County, Idaho

Ada County, Idaho

Egress Windows in Meridian, ID

Idaho's fastest-growing city, from Ten Mile to the Linder corridor

Meridian's late-1990s and 2000s tract homes around Ten Mile, the Linder corridor, Lochsa Falls, and Paramount were very often built over full unfinished basements, and finishing one into an extra bedroom or two is the standard way these families grow into their house instead of out of it. Code requires any new basement sleeping room to have a compliant egress opening — minimum clear width, height, and total area, with a reachable sill — and many of those builder basements have only small sliders that don't meet it. That means cutting and reinforcing the poured foundation wall and building a drained window well. Iron Crest Exteriors handles the cut, reinforcement, unit, and well, turning unfinished Meridian footage into rooms that legally count.

What's included

  • Bedroom & basement egress
  • Code-compliant sizing
  • Window well & drainage
  • Cutting & framing of new openings
  • Energy-efficient glass

Across Meridian — Ten Mile, the Linder corridor, south Meridian, and the rest of Ada County — we tailor every egress windows project to the age, style, and exposure of the home.

Our process

How egress windows works in Meridian

  1. 01

    Assessment & code check

    We evaluate the opening, the foundation, and the grade, and confirm the exact clear-opening width, height, area, and sill-height figures the code requires before quoting.

  2. 02

    Plan cut & reinforcement

    Where the opening must be enlarged in a foundation wall, we plan the cut and any reinforcement so the wall stays sound and the opening meets the egress dimensions.

  3. 03

    Cut, set & build the well

    We make the opening, set the egress unit level and square, and build the window well to the required size with a ladder or step where the depth calls for one.

  4. 04

    Drainage, flash & insulate

    We install proper well drainage so it won't fill with water or snowmelt, then flash, air-seal, and insulate the unit so it's weather-tight and warm.

  5. 05

    Finish, inspect & walkthrough

    Trim and grading around the well are finished, the work is coordinated for inspection against the egress code, and we walk the completed opening with you.

Every Meridian job includes pulling any permit Ada County requires and a full clean-up — we leave your home tight, weather-sealed, and looking sharp.

Working in Meridian

Idaho's fastest-growing city, from Ten Mile to the Linder corridor

Meridian sits on the flat valley floor between Boise and Nampa and has grown from farm ground into one of Idaho's most populous cities. The overwhelming majority of its housing is 1990s–2010s tract construction in master-planned subdivisions, which means the original builder vinyl siding, contractor-grade windows, and basic entry doors on tens of thousands of homes are all aging on roughly the same timeline.

Meridian's huge stock of late-1990s and 2000s tract homes drives a steady market for full re-sides and whole-house window replacements — the original materials were typically minimum-spec and are now fading, cracking, or leaking air around the frames. On the open valley floor there is little tree cover, so south and west elevations sun-fade noticeably and HOA-area homes often want a refreshed, uniform exterior color.

Areas we serve

  • Ten Mile
  • the Linder corridor
  • south Meridian
  • Lochsa Falls
  • downtown Meridian
  • Paramount

Around Meridian

  • The Village at Meridian
  • Settlers Park
  • the Ten Mile interchange
  • Kleiner Park

Egress Windows in Meridian — FAQs

Our Meridian tract home has an unfinished basement we want to add bedrooms to — what's involved in making them code-compliant?

For most of Meridian's 2000s tract basements, the existing slider windows are too small to serve as egress, so each new sleeping room needs a larger compliant opening. That involves cutting and reinforcing the poured foundation wall, setting an egress unit that meets the minimum clear width, height, and area with a reachable sill, and building a window well with drainage to the required size. We coordinate the permit and inspection so the finished basement bedrooms are documented and count for occupancy and resale.

Which parts of Meridian do you serve?

All of them — from Ten Mile to south Meridian and throughout Ada County. We'll come to your Meridian home for a free estimate.

Do you work outside Meridian, too?

We do — along with Meridian, we regularly handle egress windows in nearby Boise, Nampa, Eagle, Star, Kuna and across the wider Treasure Valley. If you're near The Village at Meridian, you're well inside our service area.

What's the site like after the work is done in Meridian?

Spotless. We finish every Meridian project by clearing out old materials and debris, so your Ada County property is left clean and protected.

Do I legally need an egress window?

Any room used as a sleeping room — including a finished basement bedroom — is required by building code to have a compliant egress opening for emergency escape and rescue. Without one, the space can't legally be called or used as a bedroom, which also affects appraisal and resale.

Can you cut an egress opening into my foundation?

Yes. Where an existing basement opening is too small, we plan and make the cut in the foundation wall with any reinforcement the structure needs, then build the window well. It requires a permit and inspection, which we coordinate, because it's both structural and life-safety work.

Egress Windows in nearby cities

We work across the Treasure Valley near Meridian.

Related windows options in Meridian

Exterior projects often pair up — here's what goes well with egress windows.

All services in Meridian

Need egress windows in Meridian?

Tell us about your Meridian home and the project you have in mind — we'll come look and give you a straight, free estimate.

CallGet Pricing