Ada County, Idaho
Board & Batten Siding in Meridian, ID
Idaho's fastest-growing city, from Ten Mile to the Linder corridor
Board and batten is practically the visual signature of Meridian's newer growth — the modern-farmhouse builds spreading across Ten Mile, Lochsa Falls, and Paramount lean hard on vertical siding, usually a board-and-batten upper paired with lap or stone below. For owners of the older 1990s–2000s tract homes nearby, adding a board-and-batten gable or feature wall during a re-side is one of the cheapest ways to pull a dated builder facade toward that current look. On Meridian's open, treeless lots the vertical orientation takes full afternoon UV, so dimensional stability matters; Iron Crest Exteriors installs fiber cement or engineered wood with even batten spacing and HOA-friendly color. The result modernizes a tract exterior without changing its footprint.
What's included
- Full board-and-batten exteriors
- Gable & accent applications
- Fiber cement & engineered wood
- Pre-finished color options
- Trim integration
Across Meridian — Ten Mile, the Linder corridor, south Meridian, and the rest of Ada County — we tailor every board & batten siding project to the age, style, and exposure of the home.
Our process
How board & batten siding works in Meridian
- 01
Design & layout
We plan the board-and-batten spacing, decide whether it's a full exterior or a gable/accent application, and lay out the battens so the vertical lines look intentional.
- 02
Material & finish selection
We help you choose fiber cement or engineered wood and pre-finished versus field-painted, with a palette that suits the modern-farmhouse look and ages well.
- 03
Tear-off & barrier
Old siding comes off where needed, the wall is inspected and repaired, and a weather-resistive barrier and flashing are installed.
- 04
Board & batten install
Boards and battens are installed to manufacturer spec with consistent spacing and clean terminations for crisp vertical lines.
- 05
Trim, seal & finish
We integrate trim, seal the joints, finish the color, and tie any accent application cleanly into the surrounding siding.
- 06
Cleanup & walkthrough
A magnetic nail sweep clears the site and we walk the finished facade with you before closing out.
Every Meridian job includes pulling any permit Ada County requires and a full clean-up — we leave your home tight, weather-sealed, and looking sharp.
Working in Meridian
Idaho's fastest-growing city, from Ten Mile to the Linder corridor
Meridian sits on the flat valley floor between Boise and Nampa and has grown from farm ground into one of Idaho's most populous cities. The overwhelming majority of its housing is 1990s–2010s tract construction in master-planned subdivisions, which means the original builder vinyl siding, contractor-grade windows, and basic entry doors on tens of thousands of homes are all aging on roughly the same timeline.
Meridian's huge stock of late-1990s and 2000s tract homes drives a steady market for full re-sides and whole-house window replacements — the original materials were typically minimum-spec and are now fading, cracking, or leaking air around the frames. On the open valley floor there is little tree cover, so south and west elevations sun-fade noticeably and HOA-area homes often want a refreshed, uniform exterior color.
Areas we serve
- Ten Mile
- the Linder corridor
- south Meridian
- Lochsa Falls
- downtown Meridian
- Paramount
Around Meridian
- The Village at Meridian
- Settlers Park
- the Ten Mile interchange
- Kleiner Park
Board & Batten Siding in Meridian — FAQs
My 2000s Meridian tract home looks dated — can board and batten modernize it without a full re-side?
Often, yes. A common approach on Meridian's 1990s–2000s subdivision homes is to keep the existing wall plane and add a board-and-batten accent where it carries the most visual weight — the front gables, an entry wall, or a two-story facade element — paired with fresh color. That targeted vertical detail is what reads as modern-farmhouse, so it shifts the whole look for far less than re-cladding every elevation. We'll plan it to fit your HOA's profile and color guidelines before any work starts.
Do you offer board & batten siding throughout Meridian?
Yes — we cover all of Meridian and Ada County, from Ten Mile and the Linder corridor to south Meridian and Lochsa Falls. Reach out for a free on-site estimate.
Is Meridian the only area you cover?
No — Meridian is one of many. We also serve Boise, Nampa, Eagle, Star, Kuna and the broader Treasure Valley, including homes around The Village at Meridian.
Do I have to handle the cleanup myself in Meridian?
Never — that's on us. We haul away the old materials and packaging from your Meridian home and leave the site tidy across Ada County.
Can board and batten be just an accent?
Yes — many homeowners use it on gables, entries, or a single elevation paired with lap siding elsewhere for contrast and depth. We can do a full board-and-batten exterior or a targeted accent, and we'll plan the layout either way so it reads deliberate.
What material do you use for board and batten?
Most often fiber cement or engineered wood. Both hold the vertical profile and exposed batten edges well and resist the splitting, warping, and rot that quickly ruin solid-wood battens in our dry, freeze-thaw climate, so the lines stay crisp.
Board & Batten Siding in nearby cities
We work across the Treasure Valley near Meridian.
Related siding options in Meridian
Exterior projects often pair up — here's what goes well with board & batten siding.
Helpful guides
Plain, local guidance to help you plan your board & batten siding project.
Need board & batten siding in Meridian?
Tell us about your Meridian home and the project you have in mind — we'll come look and give you a straight, free estimate.