Ada County, Idaho
Steel & Metal Siding in Star, ID
Star, riverside acreage growing fast along the Boise River
Star's fast growth along the Boise River has brought a wave of new custom and tract builds onto its acreage and horse-property lots, and steel siding suits the modern and farmhouse styling many of them carry — standing-seam for the contemporary homes, board-and-batten metal for the rural look. The riverside setting matters here: lower, river-adjacent lots take on more moisture than the drier valley, and steel simply won't rot, swell, or feed insects in that damp river-bottom air, while its toughness handles wind-driven weather on the open ground. Iron Crest Exteriors installs it in lap, panel, and standing-seam profiles with a continuous weather barrier and edges flashed to drain. Near the Star Sluice, that combination keeps a wall genuinely weather-tight.
What's included
- Steel lap & panel profiles
- Standing-seam & board-and-batten looks
- Hail & impact resistance
- Low-maintenance finishes
- Trim & flashing
Across Star — downtown Star, riverfront Star, rural Star acreage, and the rest of Ada County — we tailor every steel & metal siding project to the age, style, and exposure of the home.
Our process
How steel & metal siding works in Star
- 01
Design & spec
We help you choose the profile and finish — standing-seam, lap, or board-and-batten — and the gauge appropriate for your exposure, then measure for an accurate quote.
- 02
Tear-off & inspection
Old siding comes off and the wall is inspected and prepped, with any rot or substrate damage repaired before the metal goes up.
- 03
Barrier & flashing
We install the weather-resistive barrier and flash openings and transitions so the assembly drains correctly and cut edges stay protected.
- 04
Panel install to spec
Steel panels are fastened to the manufacturer's spec with the correct clearances and concealed or exposed fastening as the profile requires.
- 05
Trim & finish
Corners, trim, and transitions are detailed to match, and any accent integration with other materials is completed.
- 06
Cleanup & walkthrough
A magnetic sweep clears the site and we walk the finished elevation with you before closing out.
Every Star job includes pulling any permit Ada County requires and a full clean-up — we leave your home tight, weather-sealed, and looking sharp.
Working in Star
Star, riverside acreage growing fast along the Boise River
Star is one of the valley's fastest-growing small towns, strung along the Boise River at the western edge of Ada County. It keeps a rural-residential character — acreage lots and horse properties — even as new subdivisions arrive, so the housing stock spans original farmhouses, 1980s–1990s ranch homes, and recent custom and tract builds.
Riverside exposure in Star means siding and trim take on more moisture and humidity than drier parts of the valley, especially on the lower, river-adjacent lots. Older farmhouses and 1980s–1990s homes on larger lots frequently need a full re-side and window upgrade to be genuinely weather-tight, while new builds on open ground face the usual wind-driven sun fade.
Areas we serve
- downtown Star
- riverfront Star
- rural Star acreage
- the State Street corridor
- north Star
Around Star
- the Boise River
- Star Sluice
- the State Street corridor
- the Star bridge
Steel & Metal Siding in Star — FAQs
Is steel siding a good fit near the Boise River in Star where there's more moisture?
Moisture is one place steel quietly excels. Unlike wood or hardboard, it won't rot, swell, or grow soft in the damper air on Star's lower, river-adjacent lots — it's an inorganic, coated cladding that simply doesn't absorb water. What makes it perform there isn't only the metal, though, but the detailing: a continuous weather-resistive barrier, flashed openings, and protected cut edges so any water that gets behind drains back out. We tear off to the sheathing first to catch any existing river-bottom moisture damage.
Which parts of Star do you serve?
All of them — from downtown Star to rural Star acreage and throughout Ada County. We'll come to your Star home for a free estimate.
Do you work outside Star, too?
We do — along with Star, we regularly handle steel & metal siding in nearby Eagle, Middleton, Meridian and across the wider Treasure Valley. If you're near the Boise River, you're well inside our service area.
What's the site like after the work is done in Star?
Spotless. We finish every Star project by clearing out old materials and debris, so your Ada County property is left clean and protected.
Does metal siding dent?
Quality steel siding is highly impact-resistant and generally outperforms vinyl and wood for storm durability. Severe hail can mark thinner gauges, so for high-exposure walls we'll recommend a heavier gauge. We'll match the spec to your exposure rather than overselling.
Will it rust?
Modern steel siding uses coated, factory-finished panels engineered to resist corrosion. The vulnerable points are cut edges and penetrations, which is why proper flashing and edge protection in the install matter — and are part of how we detail every metal job.
Steel & Metal Siding in nearby cities
We work across the Treasure Valley near Star.
Related siding options in Star
Exterior projects often pair up — here's what goes well with steel & metal siding.
Helpful guides
Plain, local guidance to help you plan your steel & metal siding project.
Need steel & metal siding in Star?
Tell us about your Star home and the project you have in mind — we'll come look and give you a straight, free estimate.